When Windows Firewall is enabled, the following problems occur.
[Device Monitor]
Device Monitor does not notify a printer error even if the “Popup when an error occurs” is enabled.
“Print notification” is not shown even if “enable remote print notification” is enabled.
[HDD Utility]
Spooled jobs are not displayed in the HDD Spooler window.
These problems will be solved by Windows Firewall Setting Tool if you set the permission to Windows Firewall with our Windows Firewall Setting Tool. Download Windows Firewall Setting Tool.
I installed the Web Administrative tool in Windows Server 2003, but it does not work. How can I do it?
As the IIS security setting is added to Windows Server 2003, the CGI application cannot run on this server with default settings. Web administrative tool is one of the CGI applications.
You require to change IIS security settings on your windows server 2003.
Perform the following steps to change the IIS security settings on Windows Server 2003.
- Hold ink cartridge keeping ink-flow point up
- Press ink bag through the lower hole of the cartridge with a pin inside ink cartridge box, until ink drop appears
- Pull out the pin after above 2) step
- Clean up the surface of ink-flow point with tissue paper softly
- Repeat from 1) to 4) for two or three times
When installing Windows XP Service Pack 2, the following problems occur.
[Status Display]
Admitting status display type is set to the event in status display, the status display window is not shown if printer error occurs while printing a document.
Although Notify Remote Print is set to Enable in Status Display, the Notify Remote Print window is not displayed when printing is complete.
[HDD Utility]
Spooled jobs are not displayed in the HDD Spooler window.
These problems will be solved by Windows Firewall Setting Tool if you set the permission to Windows Firewall in Windows XP with our Windows Firewall Setting Tool. Simply download the windows firewall settings tool for Windows XP Service Pack 2.