Lexmark Printer Error Codes

Lexmark Printer Error Codes Quick Fix 2020.Lexmark is a well-known manufacturer of some of the top printers in the market. These printers are known for offering excellent printing quality along with a user-friendly manual. That is why Lexmark printers are one of the leading sellers in the market. Printers are widely used in the market for different kinds of purposes that is why it is important to know in detail about your printer.

However, it is quite common to experience an issue while using the printer. So, if you are facing a problem while using the Lexmark printer then do not worry. It is quite common to experience Lexmark printer error codes but it is important to know how to resolve these error codes.
In this blog, we are going to cover in detail about these error codes and quick solutions to resolve them. However, if you need an immediate response then get in touch with the Lexmark printer technical support team for help and assistance.

A Complete List of Lexmark Printer Error Codes

22 Paper Out or Paper Jam

  • Check the paper in the paper tray is placed properly.
  • Make sure the paper size is similar to as set by the printer.
  • Check the D-roller is working or not.
  • If there is any dust or dirt in the paper tray you need to remove it.
  • Check the gears and replace them if broken.
  • Check if the paper tray is defective replace it.

23 Paper Jam

  • You can follow the same steps as mentioned in 22 paper jams.
  • Besides, try to exit the sensor flag and the board.

24 Invalid Manual Feed

  • Check the paper feed while the printer is pulling the paper.
  • Do not feed paper in the paper tray unless mentioned.

30 Open Cover

  • The size of the paper is different as compared to the one requested by the software.
  • Install the right paper size and also change the paper size settings.
  • Check the system board and the software setup.

31 Change Envelope

  • It means that the size of the envelope that is requested by the software is different as compared to the one that is installed.
  • Install the right sizes of the envelope and change the settings accordingly.
  • Check the system board and the software setup.

35 Paper Error

  • Check the paper in the paper tray is placed properly.
  • Make sure the paper size is similar to as set by the printer.
  • Check the D-roller is working or not.
  • If there is any dust or dirt in the paper tray you need to remove it.
  • Check the gears and replace them if broken.
  • Check if the paper tray is defective replace it.
  • Besides, try to exit the sensor flag and the board

36 Load Paper

  • Check the paper in the paper tray is placed properly.
  • Make sure the paper size is similar to as set by the printer.
  • Check the D-roller is working or not.
  • If there is any dust or dirt in the paper tray you need to remove it.
  • Check the gears and replace them if broken.
  • Check if the paper tray is defective replace it.
  • Besides, try to exit the sensor flag and the board

37 Stop Command Received

  • Simply, press the start and stop button on the printer.
  • Check the software setup to resolve most of the Lexmark printer error codes. Update the software drivers of the Lexmark printer.
  • Also, check the system board.

 

 

40 System Board Failure

  • Change the system board.

41 Requested Font not Available

  • Install the requested font and then check if the error is fixed.
  • Check the software setup to fix the problem.
  • Replace the defective font card and system board.

42 Requested Font not Available

  • Install the requested font and then check if the error is fixed.
  • Check the software setup to fix the problem.
  • Replace the defective font card and system board.

43 Font Card Error

  • Power cycle to resolve the Lexmark printer error codes.
  • Replace the faulty font card and system board.

44 Font Card Error

  • Power cycle to resolve the Lexmark printer error codes.
  • Replace the faulty font card and system board.

45 Download Font Error

  • Check the setup of the software.
  • Update the software drivers.
  • Replace the defective system board.

46 Download Character Error

  • Check the setup of the software.
  • Update the software drivers.
  • Replace the defective system board.

47 Language error

  • Check the defective card and system board.
  • Check the postscript mode.
  • Make sure the installed card is supported.

54 Serial Error

  • Check the configuration settings of the serial.
  • Also, check the system board.
  • Check the communication cable.

55 Font Error

  • Check the setup of the software.
  • Update the software drivers.
  • Replace the defective system board.

89 Output Tray Full

  • Remove the paper output tray.
  • Check the flag operation.
  • Change the cable and the system board.

900 System Board Failure

  • Change the system board to resolve Lexmark printer error codes.
  • Remove the options and then check.

920 Fuser Temperature not Right

  • Check the fuser resistance.
  • The power supply has a lower voltage.
  • Check the system board.

 

 

921 Fuser not up to Temperature

  • Check the fuser resistance.
  • The power supply has a lower voltage.
  • Check the system board.

922 Fuser not up to Temperature

  • Check the fuser resistance.
  • The power supply has a lower voltage.
  • Check the system board.

923 Fuser Over Temperature

  • Check the fuser resistance.
  • The power supply has a lower voltage.
  • Check the system board.

930 Mirror Motor

  • Try to reset the cables of the print head and the system board.
  • Change the defected print head, cables, and system board.

931 Mirror Motor Speed Detect Error

  • Try to reset the cables of the print head and the system board to fix Lexmark printer error codes.
  • Change the defected print head, cables, and system board.

932 Mirror Motor Speed Detect Error

  • Try to reset the cables of the print head and the system board.
  • Change the defected print head, cables, and system board.

940 Laser Beam detect the failure

  • Try to reset the cables of the print head and the system board.
  • Change the defected print head, cables, and system board.

941 Laser Beam detect the failure

  • Try to reset the cables of the print head and the system board for resolving Lexmark printer error codes.
  • Change the defected print head, cables, and system board.

950 System Board Failure

  • Change the system board.
  • Remove the options and then check.

960 Memory Error

  • Change the system board.
  • Remove the options and then check.

970 Fan not Working

  • Change the cables of the fan and the system board.
  • Change the system board.

980 System Board Failure

  • Change the system board.
  • Remove the options and then check.

990 System Board Failure

  • Change the system board.
  • Remove the options and then check.

In this blog, we have covered in detail the Lexmark printer error codes. However, if you are unable to resolve the error code then get help from the experts.

 The Lexmark printer technical support team will help you resolve the problem immediately. They have complete knowledge and experience to help you fix the error code immediately. Contact now for help and support.

Is your Printer is Offline? Visit Now Printer Offline Support or Call Now…

+1-844-222-8339 Technical Support Toll Free USA/CA